Egress ports for Unifi Remote Access
The following ports must be permitted outbound access
| Destination | Port Number | Usage |
unifi.ubnt.com
(108.138.217.11
108.138.217.46
108.138.217.66
108.138.217.71) | TCP/UDP 53
UDP 3478
TCP/UDP 443
TCP 8883
UDP 123 | DNS, Guest Portal Redirection, Downloading Updates & Remote Access
STUN
Remote Access Service
Remote Access Service
NTP, Required for establishing secure communication |
Related Articles
Panasonic NS SIP Trunk Requirements
Panasonic NS700 SIP Trunk Requirements 1. Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications using a Panasonic PBX across a ...
NEC SV9100 SIP Trunk Requirements
Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications on a NEC SV9100 PBX across a local area network. Disclaimer: The ...
Configuring a NEC Phone to work remotely with a SL2100
Firewall The following NAT rules must be in place and ingress permitted from the home workers IP Address UDP 5080 - 5081 forwarded to the IP Address configured in programming step 10-12-09 UDP 10020 - 10277 forwarded to the IP Address configured in ...
NEC SL1100/SL2100 SIP Trunk Requirements
NEC SL1100/SL2100 SIP Trunk Requirements 1. Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications using a NEC SL1100/2100 PBX ...
Panasonic NS & NCP SIP Trunk Requirements (Carrier N)
1. Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications using a Panasonic PBX across a local area network. Disclaimer: The ...