Wildix Firewall Requirements

Wildix Firewall Requirements

Your Wildix PBX will be hosted on Amazon's Web Services (AWS) and will be assigned a unique IP Address.

Your firewall must be configured to permit the following ports and protocols to *.wildixin.com
  1. TCP 80 (HTTP)
  2. TCP 443 (HTTPS)
  3. TCP 5060 - 5061 (SIP)
  4. UDP 5060 (SIP)
  5. UDP 123 (NTP)
  6. UDP 9998 (RTP)
  7. UDP 10000 - 60000 (RTP)


    • Related Articles

    • Hosted VoIP Firewall Requirements

      Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement B4BC’s Voice over Internet Protocol (VoIP) communications on a local area network. This document is intended to be vendor ...
    • Panasonic NS SIP Trunk Requirements

      Panasonic NS700 SIP Trunk Requirements 1. Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications using a Panasonic PBX across a ...
    • NEC SL1100/SL2100 SIP Trunk Requirements

      NEC SL1100/SL2100 SIP Trunk Requirements 1. Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications using a NEC SL1100/2100 PBX ...
    • NEC SV9100 SIP Trunk Requirements

      Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications on a NEC SV9100 PBX across a local area network. Disclaimer: The ...
    • Panasonic NS & NCP SIP Trunk Requirements (Carrier N)

      1. Introduction The purpose of this document is to define the firewall and general router configuration necessary to implement Voice over Internet Protocol (VoIP) communications using a Panasonic PBX across a local area network. Disclaimer: The ...